Saanvi Corp

• BKC is used in pharmaceuticals such as leave-on skin antiseptics
• BKC is used as antiseptic in Bactine to safely treat childhood scrapes and cuts
• BKC is used in advanced, next generation hand sanitizers
• BKC is used in hygienic towelettes and wet wipes
• BKC is used in cosmetics such as eye and nasal drops, as a preservative
• BKC is used in cleaners for floor and hard surfaces as a disinfectant
• BKC is used in high-level surgical instrument sterilizing and disinfection solutions
• BKC is used in air and surface sprayable disinfectants.

• Pharmacology and Cosmetics production (as base for creams, toothpastes and lipsticks)
• Detergent & Household goods production (as soap bars glue, soluble agent in detergent pastes, fixing agent for odors in soaps and detergents, as additive in general cleaners, polishers, air fresheners, automatic dishwashing detergents)
• Production of textile supporting substances (component of dispergators and protective solutions)
• Rubber goods production (non adhesive agent for forms treatment)
• Metal works industry (agent for cleaning and polishing pastes, lubricating & cooling liquids).

• Practically insoluble in water, very soluble in ethanol and in light petroleum. Freely soluble in fatty oils and in liquid paraffin, very slightly soluble in glycerol.

• Methyl chloroformate is used in the synthesis of a new class of potent Cdk4 inhibitors in the treatment of cancer. Also used in the synthesis of Phorboxazole B

Synonyms: DADMAC; DMDAAC; Cationic Monomer; 2-PROPEN – 1 – AMINIUM, N, N – DIMETHYL – N – PROPENYL - CHLORIDE 

DADMAC is a water-soluble monomer of cationic quaternary ammonium salt with high efficiency. There is alkenyl double bond in the molecular structure and can form linear homopolymer and all kinds of copolymers by various polymerization reaction.

Usage:

DADMAC is mainly used to produce polymers, to synthesize all kinds of macromolecular water treating agents whose functions are neutralization, absorption, flocculation, purification and decoloring, showing excellent effect in decoloring, killing algae and removing organic compounds in wastewater treatment, paper making and textile printing dyeing industry. DADMAC is also used as modifier of synthetic resin to bring products electrical conductivity and antistatic property. It is often used as additive in daily chemicals to improve and modify products' performances. As to petroleum chemicals, DADMAC can be used as flocculant and blocking agent.

Storage & Handling:

DADMAC should be stored in cool (4-30ºC) to avoid frozen and heat. We certified that DADMAC in correct storage will meet sales specifications for 12 months from the date of manufacture.

Standard Packaging: For customer convenience, DADMAC is available in plastic barrels 200.0 kg or container IBC 1000.kg or flexi bag 20~24MT.

Potassium Molybdate is a white, crystalline powder, highly soluble in water. It is a high purity compound. Unlike Sodium Molybdate, Potassium Molybdate crystallizes in its anhydrous form, but the compound is still deliquescent in moist air.

Sodium Bromate is known as Neutralizer K-938, Sodium bromate(DOT), Bromic acid, Dyetone, Neutralizer K-126, Neutralizer K-140, sodium salt, Sodium bromate (NaBrO3)and has Molecular Formula of BrNaO3 and Molecular Weight of 150.891969. It is manufactured through passing bromine into solution of sodium bromide, sodium carbonate and sodium bromate in form of colorless cubic crystals in odorless from.

Its properties include Melting Point of 381°C, Density/Specific Gravity of 3.34 g/cu cm and solubility of g/100 g water in 27.5 at 0°C. Further, it has Spectral Properties Index of refraction of 1.594.

Lithium Bromide Solutions is known as 7447-41-8, Lithiumchlorid, Chlorku litu, chlorure de lithium, Lithium chloride (LiCl), LiCl, CHEBI:48607, chlorolithium, Luthium chloride and has Molecular Formula of ClLi and Molecular Weight of 42.394. It is manufactured through reaction of lithium hydroxide/ lithium carbonate with hydrochloric acid and is available in form of cubic crystals, granules or as crystalline powder or in form of white cubic crystals or powder options. Having a sharp saline taste, it also comes with boiling point of 1383°C, Melting Point of 610°C and Density/Specific Gravity of 2.07 g/cu cm.

• As fluxes and metallurgical operation (welding and brazing steel industry (paste fluxes, soldering fluxes)
• Ramming mass
• Boron Chemicals (boron salts, boron trifluoride, boron phosphates, boron fluo-borates, borate ester, ferro-boron and others)
• As fire retardant (cellulosic insulation, Christmas tree, castings, cotton batting, fabrics, paper board, particle board, fabric softener, fire extinguisher, gypsum board, plaster, plastics, textiles, wall board)
• In electroplating industry as buffer (chrome plating, nickel plating)
• Catalysts (cyclohexane oxidation, hydrocarbon oxidation)
• Others (Condensers, dishwashing products, lubricants, nuclear applications, nuclear power plants

• Accurate composition
• Longer shelf life
• Easy to use

• Maximum usages
• Effective
• Accurate composition

• (1α,2β,5α)-5-methyl-2-(1-methylethyl)cyclohexanol 2-(1-methylethyl)-5-methyl-cyclohexanol 2-isopropyl-5-methyl-cyclohexano

Uses: Used as fungicide in Arial spray on rubber and other crops.

Molybdenum Trioxide Powder is a chemicals compound with molecular weight of 143.94. The chemical formula of this chemical is MoO3. This appears as Light Grey-Green To Green Powder. Molybdenum Trioxide if found in a rare material called molybdate. The main applications for Molybdenum Trioxide is that it is used as raw material for the production of molybdenum metal. Molybdic acid can be produced with Molybdenum trioxide, by dissolving it slightly in water Molybdenum Trioxide . It is also a component of the co-catalyst used in the industrial production of acrylonitrile by the oxidation of propene and ammonia. Omkar Specility Chemicals limited is a leading manufacturer, producer and Exporter of high quality Molybdenum Trioxide and Molybdenum oxide. We export worldwide.

Molybdenum Disulfide is the inorganic compound with the formula MoS2. This black crystalline sulfide of molybdenum occurs as the mineral molybdenite. Molybdenum disulfide is the principal ore from which molybdenum metal is extracted. The natural amorphous form is known as the rarer mineral jordi site. MoS2 is less reactive than other transition metal chalcogenides, being unaffected by dilute acids. In its appearance and feel, molybdenum disulfide is similar to graphite. Indeed, like graphite, it is widely used as a solid lubricant because of its low friction properties, sometimes to relatively high temperatures. Molybdenum disulfide is often a component of blends and composites where low friction is sought.

• Grease – Generally greases contain typically 3 percent MoS2 with the critical parameters being surface roughness, load & speed.
• Pastes – These grease like products contain high levels (50- 70 percent ) of Mos2. Technical grade is typically used because this particle size can satisfy a broader range of requirements.
• Aerosol sprays & Bonded coatings- Theses products contain up to 80 percent Mos2 and a binder material that can be either organic or inorganic in nature. MIL – Spec coatings invariably use Technical Grade but if the product is in aerosol form Super fine may be required to guard against spray tip clogging.

It is mainly used as an inhibitor in some types of industrial air conditioning. Lithium Molybdate is a white, crystalline powder, very soluble in water. It is very hygroscopic. It is a high purity compound.

Ammonium Molybdate is an odorless crystalline compound ranging in color from white to yellow-green. Also called molybdic acid hexa ammonium salt tetrahydrate, ammonium molybdate tetrahydrate and ammonium heptamolybdate tetrahydrate. In chemistry a ammonium molybdate is a compound containing an oxoanion with molybdenum in its highest oxidation state of 6. ammonium molybdate can form a very large range of such oxoanions which can be discrete structures or polymeric extended structures, although the latter are only found in the solid state. The discrete Ammonium molybdate oxoanions range in size from the simplest MoO42−, found in potassium molybdate up to extremely large structures found in isopoly-molybdenum blues that contain for example 154 Mo atoms.

1,3- Dibromo-5,5- Dimethylhydantoin is also known as N,N'-Dibromodimethylhydantoin, DBDMH, Dibromantin, 77-48-5, Dibromantine and comes with Molecular Formula of C₅H₆Br₂N₂O₂ and Molecular Weight of 285.9213.

Also used in disinfection of:

• Industrial circulating water
• Swimming pool
• Spring & hospital water

1,3-Dichloro-5,5-Dimethylhydantoin is known as Omchlor, Halane, Hydan, Hydantoin, dichlorodimethyl, Dantoin, Dactin, Daktin, 118-52-5, Dichlorantin and comes with Molecular Formula of C5H6Cl2N2O2 and Molecular Weight of 197.01934.

It is prepared by passing chlorine through aqueous solution of 5,5-dimethylhydantoin and is made available in four-sided, pointed prisms form in chloroform/white powder finish. With a chlorine-like odor, it comes with Melting Point of 132°C and is less corrosive in comparison to hypochlorite solutions having same concentration of available chlorine.

Its properties include Density/Specific Gravity 1.5 at 20°C/20°C, pH of aqueous solution of about 4.4 and solubility (at 25°C) of 12.5% in carbon tetrachloride. Further, it also has solubility of 14% in chloroform, 32.0% in ethylene dichloride, 30% in methylene chloride, 9.2% in benzene and 17% in sym-tetrachloroethane.

Ammonium Bromide is known as Ammonium bromatum, azanium bromide, Nervine, Ammonii bromidum, Ammonium bromide ((NH4)Br) and has Molecular Formula of BrH4N and Molecular Weight of 97.94246. It is manufactured through passing bromine in aqueous solution over iron filings which leads to formation of ferric & ferrous bromide solution that is further treated with ammonia.

Available in form of cubic, colloidal crystals or as white crystals/granules or as colorless crystals or in form of yellowish-white crystalline mass, it is odorless in smell and has saline taste. Its other properties include Boiling Point of 235°C (vacuum), Melting Point of 452°C sublime, Density/Specific Gravity at 2.429 @ 25°C and solubility in ether, ammonia, acetone and in water.

Our company is the foremost in offering Cetyl Alcohol, CAS No. 36653-82-4, C16H34O which is widely used in manufacturing of moisturizing lotions, shampoo, cosmetics & anti itching creams along with other uses. Get best price of 25 kg Bag of 99% pure Cetyl Alcohol.

• Consistent formulation
• Excellent purity

• Chelating Agents
• Corrosion Inhibitors
• Epoxy Resin Curing Agents
• Intermediates for Textile Finishing Resins
• Oil Additives
• Paper Additives (Modifying Agents)
• Polyamide Resins
• Surface-active Agents
• (1) Estimated Value

• Agricultural Chemicals
• Chelating Agents
• Corrosion Inhibitors
• Ethylene Urea Resins
• Ion Exchange Resins
• Lubricants for Thermoplastic Resin
• Oil Additives
• Polyamide Resins
• Reforming Agents for Soils
• Rubber Chemicals
• Surface-active Agents
• (1) Tag closed cup (2) Estimated Value

• Accurate composition
• Purity
• Used in organic synthesis

• 2-Ethylhexyl chloroformate has been used in the synthesis of 1,2,4-oxadiazol-5-ones, 3- (4-fluorophenyl) -1,2,4-oxadiazol-5 (4H) -one, (alkoxycarbonyloxy) carbamimidoyl derivatives

Properties:

Acid has excellent chelation, low threshold inhibition and lattice distortion ability. ATMP can prevent scale formation, calcium carbonate in particular, in water system. Amino Trimethylene Phosphonic Acid has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, ATMPA has good corrosion inhibition.

ATMP is used in industrial circulating cool water system of thermal power plant and oil refinery plant. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMPA can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent.

The solid state of Amino Trimethylene Phosphonic Acid is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, ATMPA can be used in woven & dyeing industries and as metal surface treatment agent.

Usage:

ATMP is usually used together with organophosphoric acid, polycarboxylic acid and salt to built all organic alkaline water treatment agent. Amino Trimethylene Phosphonic Acid can be used in many different circulating cool water systems. The dosage of 1-20mg/l is recommended. As corrosion inhibitor, the dosage of 20-60mg/l is preferred.

Safety Protection:

• Acidity, Avoid contact with eye and skin, once contacted, flush with water.

Relevent:

• Amino Trimethylene Phosphonic Acid Chemicals
• Tetra sodium salt of Amino Trimethylene Phosphonic Acid (ATMP·Na₄)
• Penta sodium salt of Amino Trimethylene Phosphonic Acid (ATMP·Na₅)
• Potassium salt of Amino Trimethylene Phosphonic Acid (ATMPK_x)

Uses:

• Intermediate in the production of nylon; to make hexamethylenediamine, polyesters, polyurethane; in gasoline refining; as plasticizer,and so on.

Packing:

• Iron drums with zinc inside, net weight 200kg, bags with endometriosis, net weight 25kg, or 20000kg tank.

Storage:

• Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substance.